PVC Insulated Cable

A single-core cable has only one electrical conductor in an insulating sleeve. PVC insulated single core cables are normally used in the network power system and local power transmitting system. These PVC single core cables have a plain anneal strand or solid conduct with PVC insulation and sheath. Single core PVC insulated cable/wire is referred to as CU/PVC/PVC 0.6/1KV single core power cable. The standard is IEC 60502-1 and AS/NZS5000.1 in Australia market. 

PVC insulated two-core power cables are commonly used in transmission and distribution systems, which comply with IEC60502CU /PVC/PVC 0.6/1KV standards. Circular conductors are suitable for cables with a cross section of less than 16mm², and cables with a cross section of more than 35mm² (including 35mm²) are better with shaped conductors.

A 3 core PVC cable consists of three insulated conductors enclosed within a PVC sheath. Each conductor is typically color-coded for easy identification: red, yellow, and blue are commonly used.Circular conductors are recommended for cables with a cross-sectional area less than 16mm², whereas cables exceeding 35mm² (including 35mm²) are more effectively utilized with shaped conductors.

In electrical and electronic applications, the 4 core PVC cable stands out as a versatile and reliable solution. Composed of four insulated conductors within a PVC sheath, this cable type finds numerous applications across various industries and residential settings due to its specific advantages and capabilities.

A multi-core PVC power cable refers to an electrical cable that contains multiple insulated cores, typically used for power transmission and distribution.These cables are known as IEC60502 CU/PVC/PVC 0.6/1KV multi-core power cables. 

A 3-core + 1 ground PVC cable is a specific type of electrical cable commonly used for power distribution and wiring purposes.These cables are commonly referred to as 3-core +1 cables with a voltage of 600/1000V or IEC 60502 3-core +1 cables.

The cable construction of 3cores+2 ground wires is designed for applications requiring ground wires according to customer requirements. These cables are commonly referred to as 3cores +2 cables with a voltage of 0.6/1000 V or IEC 60502 3cores +2 cables.

The cable structure of the 4-core +1 ground wire is designed for applications requiring ground wires according to customer requirements. These cables are commonly referred to as 4-core +1 cables with a voltage of 0.6/1000v or IEC 60502 4-core +1 cables.